Bushing A604 pump Sonnax Bag

Bushing A604 pump Sonnax Bag Package Quantity: 5 Pump , Upgraded material • Width: 0.535" • Housing Bore: 1.619" • Shaft Dia.: 1.498" • Material: Steel-backed bimetal • Bushing Style: Precision Excessive torque converter hub-to-pump bushing clearance is a root cause of code 38, TCC slip codes, front seal leakage, loss of prime code 35, and pump noise. The OE bushing is machined in place, allowing a wide tolerance on pump housing bore diameters. Bore diameters can vary by more than .003". This wide tolerance is a problem when using standard replacement bushings. Standard replacement bushings will often have .008" or more hub-to-bushing clearance with an average 10 times more oil loss than the Sonnax improved fit bushing. The Sonnax improved fit pump bushing 12502-01 will restore the clearance necessary for proper operation. The Sonnax bushings should be used when the housing diameter is greater than 1.6175", which will be in most cases. • Allows precision clearances with wide tolerance pump bushings. • Does not require machining to restore correct clearance.