Boost reg.valve 096 Oversize

Boost reg.valve 096 Oversize Valve Ratcheting End Plug If regulated line leaks to exhaust at the main regulator, it creates a low pressure condition. Wear at the inner balance spools prevents the valves from stroking, which can cause high line pressure. Wear at the inboard bore also affects the K1 clutch circuit, which can result in 1-2 or 2-3 shift complaints. Wear at the inboard end of the boost regulator bore can reduce the ability of EPC/TV pressure to stroke this valve open. Full boost exiting this valve combines forces with the main regulator spring, increasing line pressure. Sonnax offers an oversized valve kit for both the main regulator valve, 119940-08K, and the boost regulator valve, 119940-07K. These kits allow the valve bores to be refurbished and restore proper pressure control. Oversized hard-coat anodized valves are manufactured to extremely tight tolerances and resist wear. The main regulator valve kit contains an o-ringed end plug to positively seal the bore and prevent regulated boost line pressure from exhausting. A new spring is included to work with the oversized valve and re-establish OEM regulated pressure specifications. A replacement ratcheting end plug is included in the boost regulator kit, as the OEM one often breaks. An adjustment tool is provided in the boost regulator tool kit for repeated assembly, disassembly and adjustment of the ratcheting end plug. Required tool: F-119940-TL7 Boost reg.valve 096 No Longer Available was added to your shopping cart. Shopping Cart »