Press.reg.v. OS ZF6HP26, ZF6HP19

Press.reg.v. OS ZF6HP26, ZF6HP19 • Valve • Sleeve Cannot be used in units that have a 053 separator plate. OE valve name: SYS.DR-V Wear is commonly found at different areas in ZF6HP19/26/32 (Gen. 1) and Ford 6R60/6R80 pressure regulator bores. Wear at the sleeve end causes high line pressure leading to broken drums, pistons or other parts, as well as restricted converter/lubrication flow. Wear at the spring end of the bore allows low line pressure and lube/TC fluid to exhaust leading to a burned converter clutch and premature bushing failure. The Sonnax oversized pressure regulator valve kit 95740-01K restores valve-to-bore or sleeve clearances so the pressure regulator valve can maintain correct pressures. • Hard-coat anodized aluminum valve resists wear • Alloy aluminum sleeve is significantly more wear-resistant than the OE sleeve • Salvages valve body castings NOTE: Kit is NOT compatible with ZF6HP19/26/32 (Gen.1) units with an 053 separator plate code or ZF6HP21/28/34 (Gen.2) units. To differentiate between Gen. 1 and Gen. 2 valve bodies, see ZF Identification Guide. Required tool: F-95740-TL